| Canon NP-7161 | |
| E000 |
- The thermistor (TH1, TH2) has poor contact or an open circuit.
- The fixing heater (H1) has an open circuit.
- The thermal switch (TSW1) has turned on.
- The triac is faulty.
- The DC controller PCB is faulty.
|
| E001 |
- The thermistor (TH1, TH2) has a short circuit.
- The triac is faulty.
- The DC controller PCB is faulty.
|
| E002 |
- The thermistor (TH1, TH2) has poor contact or an open circuit.
- The fixing heater (H1) has an open circuit.
- The thermal switch (TSW1) has turned on.
- The triac is faulty.
- The DC controller PCB is faulty.
|
| E003 |
- The thermistor (TH1, TH2) has poor contact or an open circuit.
- The fixing heater (H1) has an open circuit.
- The thermal switch (TSW1) has turned on.
- The triac is faulty.
- The DC controller PCB is faulty.
|
| E004 |
- The triac has a short circuit.
- The DC controller PCB is faulty.
|
| E010 |
- The main motor (M1) is faulty.
- The DC controller PCB is faulty.
|
| E013 |
- The waste toner feedscrew is locked.
- The waste toner feedscrew lock sensor (PS8) is faulty.
- The DC controller PCB is faulty.
|
| E030 |
- The total copy counter has an open circuit.
- The DC controller PCB is faulty.
|
| E031 |
- The accessories counter has an open circuit.
- The DC controller PCB is faulty.
|
| (E202) No code indication. Keys are disabled. (Note 2) |
- The scanner home position sensor (PS1) is faulty.
- The scanner motor (M2) is faulty.
- The DC controller PCB is faulty.
|
| E208 |
- The mirror home position sensor (PS3) is faulty.
- The mirror motor (M4) is faulty.
- The DC controller PCB is faulty.
|
| E210 |
- The lens home position sensor (PS2) is faulty.
- The lens motor (M3) is faulty.
- The DC controller PCB is faulty.
|
| E220 |
- The lamp regulator PCB is faulty.
- The DC controller PCB is faulty.
|
| E261 |
- The power supply frequency is faulty.
- The power supply PCB is faulty.
|
| E710 |
- The DC controller PCB is faulty.
|
| E711 |
- The DC controller PCB is faulty.
|
| E712 |
- The DC controller PCB is faulty.
- The ADF controller PCB is fault.
- The ADF cable is faulty.
|
| E717 |
- The DC controller PCB is faulty.
- The Remote Diagnostic Device II PCB is faulty.
|
| E800 |
- The auto power-off circuit has an open circuit.
- The DC controller PCB is faulty.
|
| E805 |
- The exhaust fan (FM2, FM4) is faulty.
- The DC controller PCB is faulty.
|
| E821 |
- The ozone filter is clogged.
- The cleaner thermistor (TH3) has poor contact or an open circuit.
- The DC controller PCB is faulty.
|
| ADF | |
| E400 |
- Exchange of data with the copier has a fault.
|
| E401 |
- The separation motor does not rotate.
- The crescent sensor is faulty.
|
| E402 |
- The belt motor does not rotate.
- The belt clock is faulty.
|
| E403 |
- The feed motor does not rotate.
- The feed motor clock is faulty.
|
| E404 |
- The delivery motor does not rotate.
- The delivery clock is faulty.
|
| E411 |
- The sensor level is faulty.
|
| E431 |
- The auto start separation motor does not rotate.
- The auto start crescent sensor is faulty.
- The auto start separation clock is faulty.
|
| Sorter | |
| E500 |
- Exchange of data with the copier is faulty.
|
| E510 |
- The feed motor does not rotate.
|
| E511 |
- The feed motor rotates too slowly.
|
| E513 |
- The tandem path motor does not rotate.
|
| E520 |
- The stack motor does not rotate.
|
| E530 |
- The alignment motor does not rotate.
|
| E531 |
- The stapler drive motor does not rotate.
|
| E540 |
- The shift motor does not rotate.
|
| E541 |
- The shift motor rotates too slowly.
|
| E550 |
- A timing jam has occurred.
|
| Cassette Feeding Module | |
| E904 |
- The waste toner box swing cam home position sensor is faulty.
- The cassette relay PCB is faulty.
|
