Z-30 |
"H" display (Blinking) | - High temperature detection: When the heat roller surface temperature exceeds about 240 degrees C
- Low temperature detection: When the heat roller surface temperature decreases below about 100 degrees C (during copying)
- Abnormal temperature control level detection: Temperature control level is not reached in certain time (during warm-up time)
- Disconnection in thermistor
|
"L" display (Blinking) | - Abnormal table operation
- Abnormal main motor operation
|
"F" display (Blinking) | - The copy lamp will not light up
- Quantity of light of the copy lamp will not reach the specified level
- Detective AE sensor
|
"P" display (Blinking) | - Paper jam
- No paper in the paper feed tray
|
"P" display (LIT) | The paper feed tray is not installed |
|