workoffice.ru - все для офиса
Главная
Контакты
Новости
Друзья сайта
Главная
Коды ошибок
Коды ошибок Sharp
Коды ошибок Z-30
29.04.2024 г.
Главное меню
Главная
Форум
Ремонт
Теория и практика
Заправка картриджей
Поиск
Аналоги
Англо-русский словарик
Файлы
Коды ошибок
Разное
Пресс-релизы
Обзоры
Краткие новости
В файловый архив, в соответсвующих разделах, выложены прошивки для чипов картриджей цветных лазерных принтеров Samsung CLP-510 и Xerox Phaser 6100. Качайте!
Последние темы на форуме
[
Kyocera-Mita
]
FS-3040MFP сканирующая линейка
от
Mishel01
28 Марта, 2024, 07:38:48
[
Любые вопросы от новичков
]
HP 106A (HP M135a) печатает с левой стороны
от
vlad_a
15 Марта, 2024, 11:46:23
Коды ошибок Z-30
Рейтинг:
/ 0
Худшая
Лучшая
Z-30
"H" display (Blinking)
High temperature detection: When the heat roller surface temperature exceeds about 240 degrees C
Low temperature detection: When the heat roller surface temperature decreases below about 100 degrees C (during copying)
Abnormal temperature control level detection: Temperature control level is not reached in certain time (during warm-up time)
Disconnection in thermistor
"L" display (Blinking)
Abnormal table operation
Abnormal main motor operation
"F" display (Blinking)
The copy lamp will not light up
Quantity of light of the copy lamp will not reach the specified level
Detective AE sensor
"P" display (Blinking)
Paper jam
No paper in the paper feed tray
"P" display (LIT)
The paper feed tray is not installed
« Пред.
След. »
Вернуться
Наша кнопка
Если вам понравился сайт, предлагем разместить у себя нашу кнопку:
Получить код